Applies to: Selected ThinkPad X, T, L, P and E, ThinkBook, Yoga and Legion entries in Lenovo’s September 2026 OCM. This collection covers nine dock configurations, not every accessory in the workbook.

Find the number that resolves similar names

A marketing name may cover more than one processor or configuration. Copy the model and machine type from system information or the device label; avoid posting a serial number. Our Lenovo directory retains the machine types from the source. We group type codes only where the model name and every included dock condition agree.

Compare the whole dock part number

Example configurationWhat stays separate
40B00135USUniversal Thunderbolt 4 Dock
40B00300USThunderbolt 4 Workstation Dock
40AY0090USUniversal USB-C Dock, 90 W adapter configuration
40AY0135USUniversal USB-C Dock, 135 W adapter configuration

These are US part references from the matrix; verify the local equivalent and included supply. The number on an adapter describes the supply, not necessarily the wattage delivered to the laptop. Lenovo: September 2026 Options Compatibility Matrix

Read power and workplace exceptions

Some listed combinations require the laptop’s own charger for adequate or rapid charging. Others warn that charging can be slow. Network boot, waking a sleeping computer, and keeping its network identity are separate capabilities. Each option translates the source code into a readable condition and retains the worksheet and cell reference.

What an empty result means

We include only the reviewed configurations and explicit positive entries. A blank cell or missing configuration is unconfirmed here; it is not a negative compatibility verdict. An older model may be documented in Lenovo’s archived workbook. Follow the current matrix and archives when your model is absent.

Build the actual screen arrangement

  1. Match your machine type and the dock part number.
  2. Read the charging condition before deciding on a one-cable desk.
  3. List the monitor models, inputs, resolution and refresh rate.
  4. Check the dock’s display table for those outputs operating together.
  5. Confirm firmware and workplace features with your IT administrator if relevant.

Ports, power and recovery

Sources & scope

These instructions combine published references with our proposed diagnostic sequence. This setup has not been physically tested by Connect Your Dock. Manufacturer documents can change; use the exact model and scope linked below.

How we assess evidence