Applies to: 120 W G2, not the 230 W or combo-cable variant. HP c04168358 v6 (2019), plus Michigan’s exact-model deployment reference, reviewed September 2026.

Which existing models have supporting evidence?

The device directory now connects the exact catalog models covered by HP’s named groups to this dock. Special suffixes and later generations do not inherit a match. The manufacturer table includes these groups:

HP group in the sourceHow to use it
EliteBook 700 / 800, G5 and G6Match the generation and ordinary model; Healthcare and x360 variants need their own entries.
ProBook 400 G5/G6 and 600 G4Do not transfer this listing to G7, R variants or an unlisted configuration.
ZBook 14u / 15u, G5/G6Keep the “u”; ZBook 15 and 15u are different machines.
Named Elite x2 / Pro x2 / x360 modelsUse the exact model-page entry, not a family-name guess.

HP: Dock Solutions c04168358 v6, September 2019, G2 ports and compatibility on page 39 (HP-authored PDF mirror)

A useful separate deployment check

Michigan reports two-monitor use with EliteBook 840 G5, 850 G5, 840 G6 and 850 G6. Its definition includes charging and peripherals, but it does not identify the screens’ resolutions. Treat that as evidence for a working deployment, not a two-4K60 certification. University of Michigan: HP Thunderbolt 120W G2 deployment compatibility

Check the actual sockets before ordering cables

SocketPractical consequence
Two rear DisplayPortsUse DisplayPort monitor cables, or a suitable directional adapter for HDMI.
Rear Thunderbolt and rear USB-C videoThese are distinct output paths; verify the host-specific combined-display table.
Front USB-CAccessory data/power. Do not confuse it with the rear video port.
No built-in HDMITwo ordinary HDMI cables alone cannot connect two HDMI monitors.

The laptop uses the dock’s intended host cable. A generic charging lead may not provide the video link. For a second-hand dock, compare the dock label, host cable and matching power adapter before judging the price.

Power and recovery

  1. Power the G2 with the correct 120 W supply; its published host ceiling is up to 100 W.
  2. Connect one screen first and select the exact input on that monitor.
  3. Add the other screen after the first works. Record both modes and compare the host-specific table if one drops resolution.
  4. Check supported Windows and dock firmware updates through HP. Ask IT about Thunderbolt approval and required network-management features.
  5. Run an ordinary work session and sleep/wake cycle with the laptop charger available. A stable desktop at idle does not prove charging under load.

Changing to the 230 W or combo-cable version changes the hardware and charging question. Do not treat its power rating as an upgrade that any USB-C laptop can consume.

Sources & scope

These instructions combine published references with our proposed diagnostic sequence. This setup has not been physically tested by Connect Your Dock. Manufacturer documents can change; use the exact model and scope linked below.

How we assess evidence